Teach you how to buy wires?
Information comes from:the Internet posted on:2022-03-01
As the main carrier of power transmission, wire is widely used in electrical equipment, lighting lines, household appliances and other aspects. Its quality directly affects the project quality and the safety of consumers' lives and property. There are many kinds of wires in the market. We should adopt appropriate wires according to our own power load.
Some of the wires sold in the market are cheap, some are more expensive, and some people tend to be cheaper first. However, many cheap wires often fail to achieve the performance he explained, which may bring many potential safety hazards to themselves. The technical content of wire production is not too high, and there is no great difference in raw materials. If it is too cheap, it is either cutting corners or insufficient quantity. Then how to identify it. Let me tell you some methods that are easy to identify:
1. To open the package and have a look at the wires inside, the national standard wires with an area of 1.5-6 square meters are required to have a skin thickness (insulation thickness) of 0.7mm. If it is too thick, it is non-standard, and the corresponding inner core is certainly not enough. You can pull the wire skin hard. What is not easy to tear is generally national standard
2. Burn it with fire and extinguish it within 5S after leaving. It is a national standard line with certain flame retardant function.
3. Look at the inner core. The higher the brightness of the inner core material (copper), the better the copper, and the brightness is uniform, shiny and has no sense of hierarchy. The national standard requires that the inner core must use oxygen free copper. Non standard, such as black rod copper, may have potential accidents.
4. The thickness of the inner core has certain national requirements, but it is not very strict. But it won't make a lot of mistakes, just a little bit, which can't be seen by the eye.
5. In terms of length, the state does not force to beat meters, but many manufacturers also beat meters. Those who beat meters are not necessarily national standards, but general national standards generally do not beat meters. Non standard beating rice is just a means.
6. The state stipulates that the wire must be marked with a certain mark, which will not exceed 500mm at most. There will be the next same mark, which generally has the product trademark, manufacturer's name, executive standards, etc